Induction Encoder No Fragile Material High Vibration Resistance
Suitable For Low Temperature Environment
Induction Encoder No Fragile Material High Vibration Resistance
Suitable For Low Temperature Environment
The encoder has the following characteristics:
● Good environmental resistance, dust, water and oil resistance, low
installation environment requirements, and no clean room
installation and operation.
● The inductive encoder is an area sensor (relative to a point
sensor) and can tolerate a certain installation deviation.
● Inductive encoder has high safety and has no enrichment effect on
magnetic dust compared with magnetic sensor. It is widely used in
key parts of automobile, military industry and aerospace fields.
● The modulation characteristics of the inductive encoder can better
suppress the 1 / f noise of the circuit, and the long-term
stability of the position is good.
● Inductive encoder, no fragile materials such as glass code disk,
high seismic resistance.
1.Naming method
| E | l | S | A- | 058- | S | 21 |
| Type: I:inductive type
O: photoelectric type
M: magnetoelectric type | Packaging style:
S: integrated packaging; C: open packaging;
F: separated packaging | Occurrence mode:
A: radial outgoing line 250mm (scattered line);
B: radial outgoing line 500mm (scattered line);
C: axial outgoing line 250mm (scattered line);
C: axial outgoing line 500mm (scattered line) | Outer diameter dimension 25: 16-25mm
36: 35-40mm
58: 55-60mm
87: 80-100mm
130: 120-150mm
300: 300mm | Model output
S: SSI
B: biss-c
R: RS485 (compatible with NRZ)
O: other | Resolution: 17:17bits, 19:19bits, 21:21bits, 23:23bits |
2.Encoder specification
Integrated package
| EIS 16 | EIS 25 | EIS 37 | EIS 40 | EIS 58 | EIs 9o | EIS 130 |
| External diameter | 16 | 25 | 37 | 40 | 58 | 90 | 130 |
| Internal diameter | 4 | 6 | 10 | 10 | 20 | 50 | 90 |
| Thickness(mm) | 8 | 7 | 8 | 10 | 10 | 10 | 10 |
| Communication | RS485/Biss -C/SSl |
| Maximum speed(rpm) | 6000 | 6000 | 4000 | 4000 | 4000 | 3000 | 1500 |
| Resolution (bits) | 17 | 17/19 | 17/19 | 17/19 | 19/21/23 | 21/23 | 23 |
Package split type
| EIF37 | EIF 58 | EIF 75 | EIF 90 | EIF 100 | EIF 125 | EIF 150 | EIF 300 |
| External diameter | 37 | 58 | 75 | 90 | 100 | 125 | 150 | 300 |
| Internal diameter | 8 | 12.5 | 25 | 40 | 50 | 75 | 110 | 250 |
| Thickness(mm) | 11.25 | 14.6 | 15.4 | 15.4 | 15.4 | 15.4 | 154 | 16.4 |
| Communication | RS485/Biss -C/SSI |
| Maximum speed(rpm) | 9000 | 9000 | 9000 | 7200 | 7200 | 6000 | 5000 | 4500 |
| Resolution (bits) | 17/19 | 19/21/23 | 21/23 | 21/23 | 21/23 | 23 | 23 | 23 |
Open type
| EIC25 | ElC40 | EIC 60 | EIlC 100 |
| External diameter | 25 | 40 | 60 | 100 |
| Internal diameter | 10 | 15 | 25 | 50 |
| Thickness(mm) | 6 | 6 | 6 | 8 |
| Communication | RS485/Biss -C/SSl |
| Maximum speed(rpm) | 6000 | 6000 | 4000 | 4000 |
| Resolution (bits) | 17 | 19/21 | 21/23 | 23 |
3. Parameter table
| General parameters | | Electrical parameters | |
| Resolving power | 17 / 19 / 21 / 23 bits | Supply voltage | 5V main 5% |
| System accuracy | 0.02 ° (standard) | Current consumption | 90mA |
| Maximum allowable speed | 9000 rpm | Connector type | Shielded twisted pair |
| Single turn / multi turn | Single lap | | |
| Mechanical parameters | | External environment | |
| Allowable installation eccentricity | 0.1mm | EMC standard | IEC6100-6-2/4 |
| Allowable axial installation error | 0.1mm | Working temperature | -45°℃-+85°℃ |
| Rotor inertia | 4.8E-O5 kgm2 | Storage temperature | -55°C-+125℃ |
| Total weight | 150g | Humidity | 0~99% non condensing |
| Od / ID / height | See specific specifications | To attack | 100g 11ms |
| Material Science | Shell aluminum alloy | Shock | 20g 10-2000Hz |
| | Protection level | P65 |
FAQ:
Q1. Can I have a sample order?
A: yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 5-7 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: By express or air or sea .
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm
the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and
the defective rate will be less than 0.2%
Q9:How is your quality control?
A: Our professional QC will check the quality during production and
carry out quality test before shipment.
Factory environment
