| Measurement |
| Measurement | Absolute over 360o . Note this is true absolute - no motion
required at start up | |
| Resolution (101001 Product Option) | 10bits 1,024counts per rev 1265.6arc-secs 6144micro-rads | |
| Resolution (121001 Product Option) | 12bits 4,096counts per rev 316.4arc-secs 1536micro-rads | |
| Resolution (141001 Product Option) | 14bits 16,384counts per rev 79.1arc-secs 384micro-rads | |
| Resolution (161001 Product Option) | 16bits 65,536counts per rev 19.77arc-secs 96micro-rads | |
| Resolution (171001 Product Option) | 17bits 131,072counts per rev 2.47arc-secs 48micro-rads | |
| Repeatability | .+/- 1 | count |
| Static Accuracy over 360O | <150arc-seconds or <0.73milliradians | |
| Internal Position Update Period | <0.1 | millisecond |
| Thermal Drift Coefficient | <1.0 | ppm/K Full-Scale |
| Max. Speed for Angle Measurement | 10,000 | r .p.m. |
| Max. Physical Speed | 10,000 | r .p.m. |
| Electrical |
| Data Outputs | RS422 Compatible, supports SSI (Serial Synchronous Interface), ASI
(asynchronous serial interface), SPI or BiSS-C . | |
| Power Supply | 5VDC (4.5-8VDC) or 12VDC (4.5- 14VDC) | VDC |
| Current Consumption | <100 (typically <75 and does not change significantly with
voltage supply) | milliAmp |
| Reverse Polarity | PSU Reverse polarity protected to max . supply voltage | VDC |
| Zero Setting | Zero Set or Reset to factory value via Electronics Module | |
| Power Up Time To 1st Measurement | <500 | millisecond |
| Environment |
| Operating Temp . | Minus 45 to +85 (+65 at >8VDC power supply)
Operation outside limits to be qualified by user . At temperatures
>85Celsius, duration should be minimized. | Celsius |
| Storage Temp . | Minus 55 to +125 | Celsius |
| Temperature Shock | MIL-STD-810G, Method 503.5, Procedure I- B (T1=-40 oC, T2=55 oC .) | |
| IP Rating - Rotor & Stator | IP67 for <60 minutes & 1m depth | |
| Humidity | RH 0-99% non-condensing - but unaffected by occasional condensation | |
| Salt Fog | Complies with DEF STAN 00-35 Pt. 3 Iss. 4, Test CN2 Salt Mist Test | |
| Bio Hazards | Complies with DEF-STAN 00-35 Pt. 4 Iss. 4 Section 11 (Hazards) | |
| Induced Dust & Sand | Complies with DEF STAN 00-35 Part 3 Issue 4, Test CL25 (Turbulent
Dust) Cat 1 | |
| Shock | IEC 60068-2-27 100g for 11ms - axial & radial - suitable for most
airborne, marine & armoured vehicles MIL-STD-810G, Method 516.6,
Procedure I- Functional Shock - axial and radial - 40 g 11 ms,
sawtooth waveform | |
| Vibration | IEC 60068-2-6 20g for 10-2000Hz - axial and radial - suitable for
most high vibration & airborne environments MIL-STD-810G, Method
514.6, Procedure I - axial and radial - Category 20, for tracked
vehicles | |
| Environmental pressure range | 0 to 4 (in other words vacuum to 4) | Bar |
| Max. permissible press. change rate | 1 | Bar/second |
| EMC Radiated Susceptibility | (Installed) Complies with IEC 61000-6-2 - suitable for fitment in
harsh EMC environments | |
| EMC Radiated Emissions | (Installed) Complies with IEC 61000-6-4 - suitable for fitment
adjacent to EMI sensitive devices | |
| Miscellaneous |
| Mass Set-Screw Rotor (max.) | 10 (for 8mm bore) | grams |
| Mass Plain Rotor (max.) | 7 (for 8mm bore) | grams |
| Mass Screw Mount Stator (max.) | 20 (for 8mm bore) | grams |
| Mass E- Module in Housing | 25 | grams |
| MTBF | 0.22 failures per 1M hours based on MIL- HBK-217+ method for ground
military vehicles at 20Celsius average | |
| MTBF | 0.35 failures per 1M hours based on MIL- HBK-217+ method for naval
sheltered at 35Celsius average | |
| Hazardous materials | Standard range - Hazardous materials not used. RoHS compliant. RoHS
certificate available. REACH statement available. | |
| Outgassing materials | Complies with NASA class'n as low outgas matl. with TML <1% &
CVCM <0.1% at 125C & 24hrs in vacuum to ASTM E-595-90 | |
| ITAR classification | Not ITAR controlled. No ITAR components. | |
| Approvals | Flammability Rating UL94V-0. Standard range - RoHS compliant - RoHS
certificate available. REACH statement available. | |
| Marking | Zettlex, logo, CE & UL94V-0 printed on Rotor & Stator faces; Serial
Number label.
Extended Product Range Option E - engraved serial number and part
number on exterior faces of Stator & Rotor | |
| Country of Manufacture | UK | |
| Export Licence Requirements | Not required for standard product options | |
